3M™ Scotch-Weld™ Hot Melt Applicator

3M™ Hot Melt Applicators are designed to help improve productivity, lower costs, and minimize waste in industrial applications. From high volume to detail work, 3M™ Hot Melt Applicators ensure optimum performance through melt-on-demand or progressive feed technology to meet your production deadlines.3M Hot Melt Applicators can meet your production needs with minimal training. 3M Hot Melt Applicator LT dispenses low temperature hot melt adhesive at a fixed temperature of 265F / 129C. Designed for use with low melt 5/8" x 2" TC sticks and is capable of dispensing up to 2.6 pounds of adhesive per hour. The applicator comes with a 0.093" tip to meet a wide variety of application needs. 3M Hot Melt Applicator LT offers lightweight design provides easy handling, thumb controlled feeder holds adhesive stick securely and dispenses precisely, and on-demand feed control minimizes waste and dripping. 3M Hot Melt Applicator LT with Quadrack Converter and Palm Trigger dispenses low temperature hot melt adhesive at a fixed temperature of 265F / 129C. Designed for use with low melt 5/8" x 8" Quadrack (Q) sticks and is capable of dispensing up to 2.6 pounds of adhesive per hour. The applicator includes palm trigger that helps reduce repetitive motion fatigue. 3M Hot Melt Applicator LT with Quadrack Converter and Palm Trigger offers lightweight design for easy handling, quadrack converter provides smooth and even flow, and palm trigger improves ergonomic comfort. 3M Hot Melt Applicator PG II LT with Magazine Feed is a low temperature, high volume applicator that operates at a fixed temperature of 265F / 129C. Designed for use with low melt 1" x 3" PG sticks and is capable of dispensing up to 6 pounds of adhesive per hour. The applicator includes magazine feed, stand and 9921, 9946 brass tips. 3M Hot Melt Applicator PG II LT with Magazine Feed offers support to high-volume demands, rear cartridge feed port provides easy loading and continuous flow of adhesive, convenient stands hold applicator in proper standby or hands free position, and available with cartridge (3 sticks) or magazine (12 sticks) feed. 3M Hot Melt Applicator TC dispenses hot melt adhesive at a fixed temperature of 385F / 196C. This lightweight (only 10 oz.) Applicator TC is designed for use with 5/8" x 2" TC sticks and is capable of dispensing up to 3.5 pounds of adhesive per hour. The on-demand feed control helps minimize hot melt waste and dripping. 3M Hot Melt Applicator TC offers lightweight and easy to use, smooth and even flow of adhesive for small to medium size projects, and good for detail work /used for details work. 3M Hot Melt Applicator TC with Quadrack Converter and Palm Trigger is a lightweight, easy to control applicator that operates at a fixed temperature of 385F / 196C. Designed for use with 5/8" x 8" Q sticks and is capable of dispensing up to 3.5 pounds of adhesive per hour. It utilizes hot melt glue sticks up to 8" long that helps reduce reloading time and, when combined with the palm trigger system, eliminates the need to forcibly press on the hot melt adhesive stick with your thumb. 3M Hot Melt Applicator TC with Quadrack Converter and Palm Trigger is the most popular applicator in the 3M Hot Melt line, supports high volume demands, unique Quadrack stick provides reliable adhesive flow, and stand holds applicator in proper standby position. 3M Hot Melt Applicator PG II Speedloader Cartridge Feed is a pneumatic high volume dispenser that operates at a fixed temperature of 385F / 196C. Designed for use with 1" x 3" PG sticks and is capable of dispensing up to 7.5 pounds of adhesive per hour. As the Speedloader chamber runs low, it emits a whistling sound. The piston can be retracted and adhesive glue sticks loaded into the chamber to keep production flowing. Applicator includes stand and 9921 and 9946 brass tips. 3M Hot Melt Applicator PG II Speedloader Cartridge Feed offers contoured grip and wide trigger provide operator comfort and precise control, positive check valve nozzle helps minimize dripping, built-in stand helps keep applicator upright, stable and ready for use, and available with cartridge (3 sticks) or magazine (12 sticks) feed. 3M Hot Melt Applicator AE II dispenses hot melt adhesive at a fixed temperature of 270F / 132C. Designed for use with "x 10" and " x 12" AE sticks and is capable of dispensing up to 4 pounds of adhesive per hour. It features a built-in stand to help keep the applicator upright, stable and in a ready to grip position. An anti-tip guard swings down from the front to prevent it from tipping. 3M Hot Melt Applicator AE II offers contoured grip and wide trigger provide operator comfort and precise control, positive check valve nozzle helps minimize dripping, and built-in stand helps keep applicator upright, stable and ready for use. 3M Hot Melt Applicator EC dispenses both low and hot melt adhesives with melting points ranging from 260F / 127C to 450F / 232C. Designed for use with 5/8" x 8" Quadrack (Q) sticks and is capable of dispensing up to 5.5 pounds of adhesive per hour. 3M Hot Melt Applicator EC offers variable temperature control allows one applicator to do many jobs, palm trigger helps improve operator comfort in high demand applications, and accepts Quadrack stick size for smooth and even flow. Hot melts extrude as 100% solid liquefied thermoplastic resins to fill gaps and wet surfaces before setting. They often exceed 100 psi shear strength, bond many substrates and are available in a variety of strengths, temperatures and open time/bonding ranges.